Coil stàilinn 410S
Tuairisgeul
Sònrachaidhean:
1.Standard: ASTM A240, JIS G4304, EN10088
2. Ìre: 200series&300series&400series
3. Tighead: 0.03mm - 6.0mm
4. Leud: 8mm-600mm
5. Length: mar iarrtas luchd-cleachdaidh
6. Surface: 2D,2B, BA, Sgàthan crìochnaichte, N04, Loidhne fuilt, crìoch Matt, 6K, 8K
7.Technology: fuar air a tharraing/roiligeadh fuar/roiligeadh teth
Stuthan:
Seòrsa | Ìre | Ìre | Co-phàirt cheimigeach % | ||||||||||
C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Eile | |||
Austenitic | 201 | SUS201 | ≤0.15 | 16.00-18.00 | 3.50-5.50 | 5.50:7.50 | ≤0.060 | ≤0.030 | - | ≤1.00 | - | ≤0.25 | - |
202 | SUS202 | ≤0.15 | 17.00-19.00 | 4.00-6.00 | 7.50-10.00 | ≤0.060 | ≤0.030 | ≤1.00 | - | ≤0.25 | - | ||
301 | 1.4310 | ≤0.15 | 16.00-18.00 | 6.00-8.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | ≤0.10 | - | |
304 | 1.4301 | ≤0.07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
304L | 1.4307 | ≤0.030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
304h | 1.4948 | 0.04-0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
309 | 1.4828 | ≤0.20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
309S | * | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
310 | 1.4842 | ≤0.25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.50 | - | - | - | |
310S | * | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.50 | - | - | - | |
314 | 1.4841 | ≤0.25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | 1.50-3.00 | - | - | - | |
316 | 1.4401 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | - | |
316L | 1.4404 | ≤0.030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | - | |
316Ti | 1.4571 | ≤0.08 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | 0.1 | Ti5(C+N)~0.70 | |
317 | * | ≤0.08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
317L | 1.4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
321 | 1.4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 | |
321 h | * | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 | |
347 | 1.4550 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Nb≥10*C%-1.10 | |
347H | 1.494 | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Nb≥10*C%-1.10 | |
Duplex | 2205 | S32205 | ≤0.03 | 22.0-23.0 | 4.5-6.5 | ≤2.00 | ≤0.030 | ≤0.020 | 3.0-3.5 | ≤1.00 | - | 0.14-0.20 | |
2507 | S32750 | ≤0.03 | 24.0-26.0 | 6.0-8.0 | ≤1.20 | ≤0.035 | ≤0.020 | 3.0-5.0 | ≤0.80 | 0.5 | 0.24-0.32 | ||
Ferrite | 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0.040 | ≤0.020 | - | ≤1.00 | - | ≤0.030 | Ti6(C+N)~0.50 Nb:0.17 |
430 | 1Cr 17 | ≤0.12 | 16.00-18.00 | - | ≤1.0 | ≤0.040 | ≤0.030 | - | ≤1.0 | - | - | - | |
444 | S44400 | ≤0.025 | 17.50-19.50 | 1 | ≤1.00 | ≤0.040 | ≤0.030 | 1.75-2.5 | ≤1.00 | - | 0.035 | Ti+Nb:0.2+4(C+N)~0.80 | |
Martensite | 410 | 1Cr 13 | 0.08-0.15 | 11.50-13.50 | 0.75 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
410S | * | ≤0.080 | 11.50-13.50 | 0.6 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
420 | 2 Chr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
420J2 | 3Cr13 | 0.26-0.35 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
PH | 630 | 17-4PH | ≤0.07 | 15.00-17.50 | 3.00-5.00 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0.15-0.45 |
631 | 17-7PH | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | ≤0.50 | - | Al 0.75-1.50 | |
632 | 15-5PH | ≤0.09 | 14.00-16.00 | 3.50-5.50 | ≤1.00 | ≤0.040 | ≤0.030 | 2.00-3.00 | ≤1.00 | 2.5-4.5 | - | Al 0.75-1.50 |
Fiosrachadh bunaiteach
Coil stàilinn stainless 410s, le deagh sheasamh an aghaidh creimeadh agus innealachadh, is e stàilinn adhbhar coitcheann agus inneal gearraidh a th’ ann.Is e seòrsa de stàilinn a th’ ann an 410S a leasaicheas an aghaidh creimeadh agus cruth-atharrachadh 410 steel.410S na stàilinn àrd-neart a dh’ fhaodas tuilleadh leasachaidh a dhèanamh air strì an aghaidh creimeadh 410 stàilinn.Tha e air a chleachdadh airson lannan roth-uidheam agus pàirtean teòthachd àrd.
• Sònrachaidhean: AISI 410s, ASTM 410s
• Crìochnachaidhean: Tha càileachd uachdar sàr-mhath aig uachdar Ba, uachdar 2b, Àir.1 (craiceann geal), uachdar 2D, Àir.4 (reothadh), HL (dealbh uèir), uachdar 8K
•Fulangas muilne air tighead & rèidh a' buntainn. Cuir fòn gu JM Steel ma tha feum agad air meudan sònraichte no stiùireadh gràin.
410S teicneòlas innealachaidh sònraichte
1D - Tha cumadh gràineach neo-leantainneach air an uachdar, ris an canar cuideachd uachdar ceò.
Teicneòlas giullachd: roiligeadh teth + peilear annealing peening picling + roiligeadh fuar + picilte annealing.
2D - Dath geal beagan airgid.
Teicneòlas giullachd: roiligeadh teth + peilear annealing peening picling + roiligeadh fuar + picilte annealing.
2B - Geal airgid le snas agus rèidh nas fheàrr na uachdar 2D.
Teicneòlas giullachd: roiligeadh teth + peilear annealing peening picling + roiligeadh fuar + annealing picling + quenching and tempering roll.
Ba - Snas uachdar sàr-mhath, faileasachd àrd, mar uachdar sgàthan.
Teicneòlas giullachd: roiligeadh teth + peilear annealing peening picling + roiligeadh fuar + picilte annealing + snasadh uachdar + quenching and tempering roll.
Àir.3 -- Deagh gloss, uachdar gràin garbh.
Teicneòlas giullachd: snasadh is teothachadh airson 2D no 2B le stuthan sgrìobach 100 ~ 120 (JIS R6002).
Àir.4 - Glè mhath, loidhnichean breagha air an uachdar.
Pròiseas giullachd: snasadh is teothachadh a’ gluasad airson 2D no 2B le stuthan sgrìobach 150 ~ 180 (JIS R6002).
HL - liath airgid le sreathan fuilt.
Teicneòlas giullachd: Is e gràin sgrìobach leantainneach a th ’ann an toraidhean 2D no toraidhean 2B le granularity iomchaidh de stuthan sgrìobach airson a bhith a’ lìomhadh an uachdar.
MIRRO -- Sònraichte.
Teicneòlas giullachd: Bathar 2D no toraidhean 2B le granularity iomchaidh den stuth bleith a ’bleith agus a’ lìomhadh gu buaidh sgàthan.